sublimation printing

How To Distinguish  Epson DX5 And DX7 Printheads Epson micro-piezo print head is a devoted print head for piezoelectric inkjet printers. With the continuous improvement of the printing industry, the technology of piezoelectric print heads is constantly updated. From the third generation of piezoelectric nozzles used in early China to the seventh technology of Epson nozzles presently launched with the aid of Roland, it can be said that it is changing with every passing day. However, in Epson's system, there is no such assertion as the first technology of nozzles, but only according to the time of launch. In China, the first-generation nozzles are in most cases called by way of home distributors for easy operation. Well, a lot of friends are asking what is the distinction between DX-5 and DX-7, so today, I will supply you with a brief introduction. Most intuitive differences: Epson DX-5 and DX-7 print heads have an equal variety of nozzle holes: 1440; DX-5 nozzle diameter:...

How To Test The New Stalling Print Head With Inkjet Printer  Before the test nozzle, use a syringe to test the nozzle to see if it is blocked. This is a very redundant, and dangerous behavior, first of all, once the head into the water, you will not dry on electricity, light burning plate, heavy burning nozzle head ; usually play a protective fluid, using a needle injection to your head, not only washed away the protective liquid head, and because of the pressure of the hand too big, easy to cause the gas nozzle plugging, resulting in ink The head of the nozzle is very fragile, absolutely can not bump, be sure to protect. Its surface is a piece of aluminum, the inner layer coated with a crystal oscillator and very small ink tube. A touch will be concave, deformation, and even broken, so that the nozzle on the scrapped Install the nozzle also be careful, must first power off, and put in place. After installed, use hands to push the car and move around, check whether smoot...

For inkjet printer , the most headache problem is the clogged print head cartridges. In the long run, it will hurt your inkjet printer ans shorten it ’s service life. It ’s too expensive to change the print head once it is blocked, so learn to get the print head clean is essential. Method 1 Once you remove the ink cartridge from the printer, you can use alcohol, and put at maximum of 10 drops in the ink cartridge. You will find a hole there, in which the ink usually runs from the ink cartridge to the head of the printer. When done, you can put the cartridge back in the printer and run the auto cleaning process from the printer's option in order to clean the blocked holes of the cartridge. Run print tests first and once you are satisfied with the results, you can start using the printer normally. If you want to go further: Step 1: Remove the tank. Step 2: Connect a hose directly on the inlet ink. Step 3: Locate the reservoir sensor and press it to make it appear ...

Epson 5113 print head are popular nowadays because of it’s high speed and high resolution. Compared with DX5 and DX7 print head, we will find there are many advantages.   1.The number of nozzles   DX5 and DX7 print heads : 8 lines*180 nozzles=1440 nozzles,the smallest nozzle is 3.5PL/5PL.   5113 print heads: 4 lines*800 nozzles=32 00 nozzles, the smallest nozzles is 1.5PL.    2. The size of the print head   The size of 5113 print head is 1.3 inch, 30% width than the DX5 and DX7 print heads.    3. High speed   Because the amount of nozzles are much more than the DX5 and DX7 print head, so the 5113 print head can print with 3 pass and the speed can up to 30 m2/h.    4. The price   The price of DX5 printhead is usually USD$530 for one, and it is much cheaper than DX5 and DX7 print heads.   With the development of the technology, we believe that 5113 ...